Supplier Quality Field Representative (SQFR) Senior - Huntsville, AL
Lockheed Martin •
Position Type: Permanent
Job Description:
Description:Lockheed Martin (LM) Missiles and Fire Control (MFC) seeking a resident Supplier Quality Field Representative (SQFR) for a position located in Huntsville, Alabama.
The position will require full time onsite at the assigned supplier as necessary and may require travel out of the assigned geographical area as necessary to support other suppliers across U.S. The individual may also be responsible for other suppliers in a nearby region that may require recurring travel away from assigned location.
Duties Include:
Performance at suppliers of scheduled product source inspections, first article inspections, purchase order reviews, surveillance assessments, qualifications, and product line validations as outlined by AS9102 and applicable company and industry standards.
Provide internal and supplier support for root cause and corrective/ preventative actions tied to Supplier Corrective Action Requests, Audit Findings, and various Action Items.
Interface with customer and program management.
Support suppliers failure diagnosis, investigations, review boards include Material Review Board (MRB) related activities.
Perform Quality Management System Assessments and Special Process Surveys.
Perform on-going surveillance of suppliers conformance to Lockheed Martin, Industry, and Supplier requirements/ documents and production process. Provide written weekly reports.
Provide technical liaison support related to Quality Engineering matters.
Ensure supplier contract flow-down requirements are implement and verified and interfaces with supplier on a daily basis.
Provide Strategic corrective actions.
Interface with and inspect products such as launcher tubes/ pods, mechanical, machined, composites, electrical, and more.
Mentor and train multiple Quality individuals.
Support complex supplier issues enhancing LM/ Supplier relationship.
Must facilitate a team-building approach in working closely with the assigned supplier becoming an integral team player and be a hands on part of the solution to issues as they arise.
Basic Qualifications:
Technical bachelors degree or equivalent mix of experience and education.
MUST be an effective communicator and team-player working hand in hand with the assigned supplier.
MUST build a collaborative working relationship built on trust and mutual respect.
Working knowledge of composites and machining.
Effective communication and interface with at least some of the following: Government Representatives / DCMA, Quality Program Management, Quality Engineering, Program Management, Engineering, Supplier Management, Subcontract Management, Manufacturing Engineering, and Subcontract Management.
Knowledge and understanding of critical design attributes, source acceptance inspections, and auditing.
Experience with reviewing or performing AS9102 First Article Inspections.
Capable of performing root cause analysis and identifying solutions to complex problems to document suppliers quality deficiencies following the non-conformance process. Ensure effective corrective action and follow-up is in place.
Experience with continual improvement practices, using tools like Statistical Process Control (SPC) and Causal Analysis to drive Corrective and Preventative Action.
Must be able to ensure supplier contract flow-down requirements are implemented and verified and interfaces with supplier on a daily basis.
Strong background understanding engineering drawing requirements including GD&T and mechanical inspection methods.
Overall understanding of how to manage and interface with a supplier daily to support program needs.
Demonstrated leadership and customer relationship management skills.
Effective communication skills (oral and written) with ability to navigate complex situations.
Proficient usage of Microsoft programs.
Ability to work a flexible schedule and support on OFF days if needed.
Must have the ability to obtain a Secret Security Clearance.
Desired Skills:
Experience with AS9145 APQP & PPAP.
Experience with Quality or Manufacturing auditing.
Experience with Electrical hardware.
Experience with SAP and Procure to Pay (P2P).
Experience or knowledge of special processes and associated specification requirements.
Prior experience working at MFC and LMs supply base.
American Society for Quality (ASQ) Certifications.
Expert in Geometric, Dimension, & Tolerancing (GD&T).
Extensive technical knowledge and experience in the area of Supplier Quality.
Experience with providing technical liaison support related to design and quality engineering matters.
Experience with new product qualification and testing.
Experience with new production line set up and validations.
Experience with creating work instructions and inspection instructions.
Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level: Secret
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Full-time Remote Telework: The employee selected for this position will work remotely full time at a location other than a Lockheed Martin designated office/job site. Employees may travel to a Lockheed Martin office for periodic meetings.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 4x10 hour day, 3 days off per week
Pay Rate:
The annual base salary range for this position in most major metropolitan areas in California and New York is $85,900 - $161,900. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/ training, key skills as well as market and business considerations when extending an offer.
Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays.
This position is incentive plan eligible.
Pay Rate:
The annual base salary range for this position in California and New York (excluding most major metropolitan areas), Colorado, or Washington is $74,700 - $143,100 . Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidates work experience, education/ training, key skills as well as market and business considerations when extending an offer.
Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays.
(Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year.
This position is incentive plan eligible.
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the worlds most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.
With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.
If this sounds like a culture you connect with, you’re invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Experience Level: Experienced Professional
Business Unit: MISSILES AND FIRE CONTROL
Relocation Available: Possible
Career Area: QA/Test and Inspection
Type: Full-Time
Shift: First
Experience with AS9145 APQP & PPAP.
Experience with Quality or Manufacturing auditing.
Experience with Electrical hardware.
Experience with SAP and Procure to Pay (P2P).
Experience or knowledge of special processes and associated specification requirements.
Prior experience working at MFC and LMs supply base.
American Society for Quality (ASQ) Certifications.
Expert in Geometric, Dimension, & Tolerancing (GD&T).
Extensive technical knowledge and experience in the area of Supplier Quality.
Experience with providing technical liaison support related to design and quality engineering matters.
Experience with new product qualification and testing.
Experience with new production line set up and validations.
Experience with creating work instructions and inspection instructions.
Job Ident #:
66589099584
(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)